WIRE STRIPPER 0.2-6mm

Pliers designed for removing cable insulation.

Wire stripper working range: 0.2 - 6.0 mm² (10 - 24 AWG)

-multifunctional, reinforced device, with rubberized handle and hardened blades

-mechanism: front, automatic

-during the stripping process, it automatically adjusts to the cross-section of the cable being worked on

-has an additional cutter and an end crimper

-stripper with adjustable stripping length

-length: 205 mm

-weight: 0.30 kg

Crimping of connector terminals:

-insulated: 0.5 - 6 mm² (22-10 AWG),

-uninsulated: 4 - 6 mm² (12-10 AWG), 1.5 - 2.5 mm² (16-14 AWG), 0.5 - 1mm² (22-18 AWG).

HIGH-QUALITY CONSTRUCTION

AMICO AUTOMATIC INSULATION STRIPPER

-The INSULATION STRIPPER is a practical tool for quick and precise removal of insulation from single or multi-core cables. To remove the insulation, insert the wire into the jaws so that it is flush with the tool, then squeeze the handle.

-CABLE CUTTING TOOL - another function of the wire stripper is to cut wires. The 11 mm long blade is located between the tool's handles. To cut a cable of similar or smaller width, simply place it between the blades and squeeze firmly.

-CONNECTOR END CAPSULE - With the tool, you can crimp insulated and uninsulated connector ends onto wire conductors with a cross-section of 1.5 mm2 to 6 mm2. Simply insert the conductor with the stripped end and insert it into the connector terminal, then place it in the crimping spot

-PRESSURE FORCE ADJUSTMENT + LIMITER - the device has a dial located under the jaws. With it, you can adjust the amount of pressure on the insulation, so you don't have to worry about damaging the cable during work.